Razer Kiyo V2

When this model makes sense

A desk camera with Windows software effects. Start with that job, then check the surrounding connections. A feature on this device does not establish that the computer, software and destination support the same path.

This is part of the current catalog. Current availability in a manufacturer family does not guarantee retail stock, every regional variant or support for every operating-system release. Match the exact model name when reading a product listing.

Three useful fits

• Put one live camera source on a computer USB data port, with no separate HDMI capture box.
• Frame a seated presenter from the intended working distance; set the focus and field of view before adding digital crops.
• Use the documented resolution and frame rate in your streaming application. Test lighting and motion together rather than choosing from a resolution label alone.

• Best starting job: a desk camera with windows software effects.
• Upgrade around owned gear: use the setup builder to check this connection against your existing computer and sources before replacing adjacent equipment.
• Controlled comparison: compare the required input, output and workflow using the webcam versus camera guide. Choose the smaller sufficient path when extra hardware does not solve a declared problem.

Connections and decision fields

Read connector shape and data protocol separately. An adapter can change the cable ends; it cannot create a faster host controller, add a microphone preamp or convert protected HDMI into a supported capture source.

Exact identity

Razer Kiyo V2

Lifecycle

Current catalog

Equipment role

webcam

Connector shape

USB-C to USB-C

Data protocol

USB 3.0

Host operating systems

Windows 10+; Synapse 4 is PC-only as observed

Capture output

4K · 30 fps, 4K30; 1440p · 30 fps, 1440p30; 1080p · 60 fps, 1080p60/30/24; 1080p · 30 fps, 1080p60/30/24; 1080p · 24 fps, 1080p60/30/24; 720p · 60 fps, 720p60/30; 720p · 30 fps, 720p60/30

Video Formats

MJPEG up to 4K30 and 1080p60; YUY2 up to 4K15 and 1080p60; NV12 up to 4K20 and 1080p60

Sensor

8.3 MP Sony STARVIS

Field Of View

93 degrees configurable

Focus

Auto or manual

Focal Length

3.0 mm; 20 mm full-frame equivalent

Hdr Support

Yes at 30 fps

Mounts

Fixed L-shaped monitor mount; 1/4-inch tripod thread

Privacy Shutter

Integrated

Cable

USB-C to USB-C, 2 m

Built In Mic

Stereo omnidirectional microphone with noise cancellation; 16-bit/48 kHz

Dimensions

27 x 27 x 116 mm camera body; 74 x 65.3 x 116 mm complete product

Weight

255 g

Included parts

Razer Kiyo V2; 2 m USB-C to USB-C cable; Product information guide

Use the listed modes as a starting point for the connection. Before a live session, select the exact source in OBS and record it with the other devices connected. If the required mode is absent, lower the output or change the connection before replacing the source.

Check these conditions first

1. The main limitation: Use the basic camera output on a supported host; choose a supported Windows setup if Razer software effects are part of your plan. Test those effects in OBS before the show.
2. The rest of the path: the operating system must recognize the input, and the production application must expose the selected mode. A device visible in a system panel may still be unavailable to OBS if another application owns it.
3. The session conditions: check the full intended duration with all the other devices connected. A short isolated test does not expose shared USB contention, camera runtime limits, accidental monitoring loops or changing household upload.

For a webcam, test the intended crop, lighting and frame rate in the actual application. A large output resolution can help a tighter crop, but it does not establish low-light quality or prove every feature is available without manufacturer software.

If the builder reports a hard blocker, solve that requirement before buying an alternative. A conditional result needs the named check. An unknown result means the information is insufficient; it is not a negative review of this model.

What is included, and what may be missing

• Razer Kiyo V2
• 2 m USB-C to USB-C cable
• Product information guide

Write down both cable ends and the required data rating. Check length against the real desk route, allowing slack at moving joints without putting tension on a socket. If a host has USB-A and a device arrives with only a C-to-C cable, choose a suitable data cable or adapter; the host’s underlying data speed still applies.

Mounting parts deserve the same check as signal cables. Confirm thread, clamp thickness, load and available space where these apply. “Mount compatible” is incomplete without the mating connector or dimensions. Keep adapters in the plan so the final wiring sheet does not conceal an extra purchase.

Use the optional cost fields in the builder for amounts you have observed yourself. A missing purchase amount stays unknown and is excluded from the known subtotal; it is never shown as a free item. The site does not display hardware prices or stock.

Place it in the complete setup

The diagram illustrates a direct USB setup. Put Razer Kiyo V2 in its webcam role, then follow each required input to an actual source and each output to an actual destination. For an HDMI or XLR component, insert the required capture device or interface between the source and host; do not interpret the direct USB illustration as a universal connection.

1. Connect mounts and power before plugging in the signal cables. Keep the input gain or monitor volume low while changing connections.
2. Select the exact device and mode in the operating system and production software. Close any second application that may be using the same video device.
3. Add each source once. If a routing application already feeds the capture audio to OBS, do not enable a second direct route for the same sound.
4. Record a representative sample with speech, movement and other sources active. Play it back independently of the live monitoring path.
5. Test the platform preview with the intended network and output settings, then save a recovery scene and reconnection order.

Use the Setup Path Builder to produce a connection ledger, or go directly to the pre-stream checklist when you have finished the wiring. For the underlying choice, see webcam versus camera.