Elgato Key Light

When this model makes sense

A larger desk-mounted light for controlled framing. Start with that job, then check the surrounding connections. A feature on this device does not establish that the computer, software and destination support the same path.

This is part of the current catalog. Current availability in a manufacturer family does not guarantee retail stock, every regional variant or support for every operating-system release. Match the exact model name when reading a product listing.

Three useful fits

• Light a seated presenter from a stable mount while leaving the camera and microphone in usable positions.
• Match the stated warm-to-cool adjustment range to the room and camera white balance, then keep that setting consistent across the scene.
• Reuse an appropriate desk mount and power arrangement, with room for the panel and cable route. Set brightness from the actual powered output, not the maximum alone.

• Best starting job: a larger desk-mounted light for controlled framing.
• Upgrade around owned gear: use the setup builder to check this connection against your existing computer and sources before replacing adjacent equipment.
• Controlled comparison: compare the required input, output and workflow using the lighting layout guide. Choose the smaller sufficient path when extra hardware does not solve a declared problem.

Connections and decision fields

Read connector shape and data protocol separately. An adapter can change the cable ends; it cannot create a faster host controller, add a microphone preamp or convert protected HDMI into a supported capture source.

Exact identity

Elgato Key Light

Lifecycle

Current catalog

Equipment role

lighting

Connector shape

None documented

Brightness

2800 lm adjustable

Color Temperature

2900–7000 K

Power Draw

Up to 45 W

Weight

1.3 kg

Power input

Included power supply

Data protocol

Wi-Fi2.4/5 GHz 802.11a/b/g/n

Mounts

Four1/4 inch threads; Master Mount L desk clamp up to60 mm

Mount Height

55–125 cm

Included parts

Key Light; Master Mount L; Power supply; Quick Start Guide; Cable clips

Host operating systems

Windows10 64-bit+; macOS13+

Required Software

Control Center

Use the listed modes as a starting point for the connection. Before a live session, select the exact source in OBS and record it with the other devices connected. If the required mode is absent, lower the output or change the connection before replacing the source.

Check these conditions first

1. The main limitation: Check the desk edge, clamp clearance and power location before choosing it.
2. The rest of the path: the operating system must recognize the input, and the production application must expose the selected mode. A device visible in a system panel may still be unavailable to OBS if another application owns it.
3. The session conditions: check the full intended duration with all the other devices connected. A short isolated test does not expose shared USB contention, camera runtime limits, accidental monitoring loops or changing household upload.

For a light, check the stand or clamp against the actual desk and keep the power path separate from control. Place the light for the face and camera exposure first; do not assume a bigger fixture fixes glare, glasses reflections or mixed room color.

If the builder reports a hard blocker, solve that requirement before buying an alternative. A conditional result needs the named check. An unknown result means the information is insufficient; it is not a negative review of this model.

What is included, and what may be missing

• Key Light
• Master Mount L
• Power supply
• Quick Start Guide
• Cable clips

Write down both cable ends and the required data rating. Check length against the real desk route, allowing slack at moving joints without putting tension on a socket. If a host has USB-A and a device arrives with only a C-to-C cable, choose a suitable data cable or adapter; the host’s underlying data speed still applies.

Mounting parts deserve the same check as signal cables. Confirm thread, clamp thickness, load and available space where these apply. “Mount compatible” is incomplete without the mating connector or dimensions. Keep adapters in the plan so the final wiring sheet does not conceal an extra purchase.

Use the optional cost fields in the builder for amounts you have observed yourself. A missing purchase amount stays unknown and is excluded from the known subtotal; it is never shown as a free item. The site does not display hardware prices or stock.

Place it in the complete setup

The diagram illustrates a direct USB setup. Put Elgato Key Light in its lighting role, then follow each required input to an actual source and each output to an actual destination. For an HDMI or XLR component, insert the required capture device or interface between the source and host; do not interpret the direct USB illustration as a universal connection.

1. Connect mounts and power before plugging in the signal cables. Keep the input gain or monitor volume low while changing connections.
2. Select the exact device and mode in the operating system and production software. Close any second application that may be using the same video device.
3. Add each source once. If a routing application already feeds the capture audio to OBS, do not enable a second direct route for the same sound.
4. Record a representative sample with speech, movement and other sources active. Play it back independently of the live monitoring path.
5. Test the platform preview with the intended network and output settings, then save a recovery scene and reconnection order.

Use the Setup Path Builder to produce a connection ledger, or go directly to the pre-stream checklist when you have finished the wiring. For the underlying choice, see lighting layout.