What else you need to use it
Worked out from FIFINE’s own specifications and box contents for this model. The setup builder checks the same parts against your computer and the rest of your gear.
Check first
- For USB: a USB port that fits the cable. A USB cable is in the box, but its ends are not listed. Check it against your computer’s ports.
Optional
- For XLR: an audio interface or mixer with an XLR microphone input. A computer has no XLR input. The interface’s preamp raises the microphone’s signal and sends it to the computer over USB. Compare audio interfaces
- For XLR: an XLR cable. None comes in the box.
- A boom arm, if you want it closer. A desk stand is in the box. An arm lets you bring the microphone nearer your mouth without it sitting in the camera shot; check the arm fits its 3/8-inch or 5/8-inch thread.
- Wired headphones with a 3.5 mm plug. Its headphone socket lets you hear yourself straight from the microphone, before the computer adds delay. Headphone test
When this model makes sense
- Record one voice over USB now, or through an XLR interface later; get the placement right before adding effects.
- Use its headphone socket to hear yourself while you set distance and gain.
- Use it with an XLR cable and an interface that has enough gain. Its USB voice effects don’t apply on XLR.
The USB versus XLR guide weighs it against the other ways to fill the same role.
Connections and specs
- Full name
- FIFINE AmpliGame AM8
- Still sold
- Yes, a current model
- Type
- Microphones
- Connection
- Connector shape
- USB; 3-pin XLR; 3.5 mm headphoneA plug’s shape doesn’t tell you its speed →
- Audio outputs
- USB; XLR
- Microphone type
- Dynamic
- Pickup pattern
- Cardioid
- Direct monitoring
- YesWhat direct monitoring does →
- Power input
- 5 V ±0.25 V over USB
- Connects by
- USB/XLR
- Frequency response
- 50 Hz – 16 kHz
- Signal-to-noise ratio
- More than 80 dB
- Sensitivity
- -50 ±3 dB
- Max SPL
- 120 dB
- Controls on the device
- Gain; Headphone volume; Tap-to-mute; RGB lighting button
- Lighting
- RGB, 10 modes and colours
- On the XLR route
- RGB, mute and the controls do not work on the XLR route
- Controls
- Tap to mute
- Yes
- Size and mounting
- Mounts
- Metal desk stand; 3/8-inch and 5/8-inch threads
- In the box
- Included parts
- AM8 microphone; Metal desk stand; USB cable
- Not in the box
- XLR cable; Audio interface for the XLR route
Check these conditions first
Not yet confirmed from FIFINE’s documents: operating systems, dimensions, needs 48 V phantom power. The builder treats them as unknown, never as a yes.
For a microphone, set your distance and input gain before adding any processing. Speak as loudly as you will on stream, listen back to a recording and leave some headroom. Judge a USB/XLR microphone in the mode you will use: its USB voice processing does not carry over to XLR.
What is included, and what may be missing
- AM8 microphone
- Metal desk stand
- USB cable
Both cable ends and the data rating matter more than the plug shape: streaming cables and ports explains how to match them.
Place it in the complete setup
Every connection
- Webcam USB outUSB cable → A USB port on your computer
- Microphone USB outUSB cable → A USB port on your computer
- Microphone / interface headphone out3.5 mm or 6.3 mm headphone connection → Headphones (what you hear)
- Computer Ethernet portEthernet cable → router; your upload → Platform (check the stream preview)
- Wall socketThe maker’s power supply, or USB power → Computer and devices that need their own power
The diagram shows a simple USB setup. Find where the FIFINE AmpliGame AM8 goes, then follow each input back to what feeds it and each output on to where it goes. HDMI and XLR gear needs a capture card or audio interface between it and your computer; it doesn’t plug straight in the way this USB example does.
The setup builder turns this into a connection list for your own computer and gear, and the pre-stream checklist covers the rehearsal once it is wired.