Elgato Facecam Pro

When this model makes sense

Keep an owned camera that fits your host. Start with that job, then check the surrounding connections. A feature on this device does not establish that the computer, software and destination support the same path.

If you already own this model, keep it in the builder and test the path you actually use. Its lifecycle label is a new-purchase boundary, not a claim that functioning equipment must be replaced. Current-generation features are deliberately kept separate from this record.

Three useful fits

• Keep this exact owned generation when its recorded input and output cover your existing session.
• Replace a missing cable or mounting part before replacing a working device; use the connector and dimensions listed for this generation.
• Rehearse the current host and software path after an update. Retain the device if the recorded output still works for the whole session.

• Best starting job: keep an owned camera that fits your host.
• Upgrade around owned gear: use the setup builder to check this connection against your existing computer and sources before replacing adjacent equipment.
• Controlled comparison: compare the required input, output and workflow using the webcam versus camera guide. Choose the smaller sufficient path when extra hardware does not solve a declared problem.

Connections and decision fields

Read connector shape and data protocol separately. An adapter can change the cable ends; it cannot create a faster host controller, add a microphone preamp or convert protected HDMI into a supported capture source.

Exact identity

Elgato Facecam Pro

Lifecycle

Legacy; for owners only

Equipment role

webcam

Connector shape

USB-C

Data protocol

USB3.0

Usb Gbps

5

Video Modes

2160p60/30,1080p60/30,720p60/30

Video Formats

H264 orMJPEG up to2160p60; NV12 up to1080p60

Focus

Autofocus ormanual;10 cm toinfinity

Aperture

f/2.0

Focal Length

21 mm full-frame equivalent

Field Of View

90 degrees configurable

Sensor

1/1.8 inch Sony STARVIS CMOS

Dimensions

116 × 33 × 79 mm

Weight

242 g

Cable Length

1.8 m

Host operating systems

Windows10 64-bit+ at original release; macOS11+ at original release

Included parts

Facecam Pro; Mount with 1/4-inch thread; USB-C to USB-C cable, 180 cm; Quick Start Guide

Use the listed modes as a starting point for the connection. Before a live session, select the exact source in OBS and record it with the other devices connected. If the required mode is absent, lower the output or change the connection before replacing the source.

Check these conditions first

1. The main limitation: Keep this owned camera only if the current host exposes the video mode you need. Record the complete session with other USB video devices active.
2. The rest of the path: the operating system must recognize the input, and the production application must expose the selected mode. A device visible in a system panel may still be unavailable to OBS if another application owns it.
3. The session conditions: check the full intended duration with all the other devices connected. A short isolated test does not expose shared USB contention, camera runtime limits, accidental monitoring loops or changing household upload.

For a webcam, test the intended crop, lighting and frame rate in the actual application. A large output resolution can help a tighter crop, but it does not establish low-light quality or prove every feature is available without manufacturer software.

If the builder reports a hard blocker, solve that requirement before buying an alternative. A conditional result needs the named check. An unknown result means the information is insufficient; it is not a negative review of this model.

What is included, and what may be missing

• Facecam Pro
• Mount with 1/4-inch thread
• USB-C to USB-C cable, 180 cm
• Quick Start Guide

Write down both cable ends and the required data rating. Check length against the real desk route, allowing slack at moving joints without putting tension on a socket. If a host has USB-A and a device arrives with only a C-to-C cable, choose a suitable data cable or adapter; the host’s underlying data speed still applies.

Mounting parts deserve the same check as signal cables. Confirm thread, clamp thickness, load and available space where these apply. “Mount compatible” is incomplete without the mating connector or dimensions. Keep adapters in the plan so the final wiring sheet does not conceal an extra purchase.

Use the optional cost fields in the builder for amounts you have observed yourself. A missing purchase amount stays unknown and is excluded from the known subtotal; it is never shown as a free item. The site does not display hardware prices or stock.

Place it in the complete setup

The diagram illustrates a direct USB setup. Put Elgato Facecam Pro in its webcam role, then follow each required input to an actual source and each output to an actual destination. For an HDMI or XLR component, insert the required capture device or interface between the source and host; do not interpret the direct USB illustration as a universal connection.

1. Connect mounts and power before plugging in the signal cables. Keep the input gain or monitor volume low while changing connections.
2. Select the exact device and mode in the operating system and production software. Close any second application that may be using the same video device.
3. Add each source once. If a routing application already feeds the capture audio to OBS, do not enable a second direct route for the same sound.
4. Record a representative sample with speech, movement and other sources active. Play it back independently of the live monitoring path.
5. Test the platform preview with the intended network and output settings, then save a recovery scene and reconnection order.

Use the Setup Path Builder to produce a connection ledger, or go directly to the pre-stream checklist when you have finished the wiring. For the underlying choice, see webcam versus camera.