Webcam testMicrophone testWebcam and mic test
TestsWebcam testMicrophone testWebcam and mic testHeadphone testPre-stream checklist
SetupsSetup builderSetup guidesAudio routingCamera checker
SettingsBitrate calculatorUpload calculatorSettings by platformTwitchYouTube LiveKickFacebook LiveTikTok LIVE
GearAll gearComparisonsStream Deck selector
GuidesChoose your gearConnect and set upFix a problemAll guidesAll tools
AboutCorrections and contact

Search stays on this device. Esc to close.

As an Amazon Associate I earn from qualifying purchases. How this site earns · Amazon offers a free 30-day Prime trial, with free delivery on eligible items.

Shure SM7B

A broadcast dynamic microphone for a close, speech-focused voice.

Elgato Wave Neo

A plug-in USB microphone for a simple desk.

Before you choose

Shure SM7B

The catch: It needs more gain than most entry-level interfaces give: Shure asks for a preamp with more than 60 dB of gain, or an inline booster. Choose the interface before the microphone.

You need:

  • An audio interface or mixer with an XLR microphone input
  • An XLR cable
  • An interface with more than 60 dB of gain, or an inline booster
  • A microphone stand or boom arm

Elgato Wave Neo

The catch: Choose it for one direct USB speaking position and use its headphone jack to monitor your voice. For two separately controlled speakers, plan two microphones and an interface with two inputs.

Check first:

  • A USB-A port on your computer

Everything to check before you buy

Where they differ

SpecsShure SM7BElgato Wave Neo
ConnectionXLRUSB
Elgato Wave Neo plugs straight into a computer; Shure SM7B needs an audio interface and an XLR cable.
CapsuleDynamicCondenser
Shure SM7B is dynamic, which picks up less of the room; Elgato Wave Neo is a condenser, which suits a quiet room.
Preamp gain neededmore than 60 dBNot published
Shure SM7B needs more than 60 dB of preamp gain, by its maker’s guide; Elgato Wave Neo’s maker publishes no such need.
Stand in the boxNoYes
Elgato Wave Neo comes with a desk stand; Shure SM7B needs a stand or boom arm.

Where they are the same

Pickup patterns
Cardioid

Not enough data to compare

We haven’t confirmed a figure for one or both models on: XLR cable in the box. The site leaves these out rather than guess.

What else each needs

Shure SM7B

SM7B
An audio interface or mixer with an XLR microphone input
An XLR cable
An interface with more than 60 dB of gain, or an inline booster
A microphone stand or boom arm
  • You need: An audio interface or mixer with an XLR microphone input. A computer has no XLR input. The interface’s preamp raises the microphone’s signal and sends it to the computer over USB.
  • You need: An XLR cable. None comes in the box.
  • You need: An interface with more than 60 dB of gain, or an inline booster. Shure asks for a preamp with more than 60 dB of gain for this microphone.
  • You need: A microphone stand or boom arm. No stand comes in the box; it mounts on a 5/8-inch or 3/8-inch thread.

Elgato Wave Neo

Wave Neo
A USB-A port on your computer
A boom arm, if you want it closer
Wired headphones with a 3.5 mm plug
  • Check first: A USB-A port on your computer. The cable in the box is USB-C to USB-A. If your computer only has USB-C ports, use a USB-C to USB-C cable instead.
  • Optional: A boom arm, if you want it closer. A desk stand is in the box. An arm lets you bring the microphone nearer your mouth without it sitting in the camera shot; check the arm fits its 1/4-inch, 5/8-inch or 3/8-inch thread.
  • Optional: Wired headphones with a 3.5 mm plug. Its headphone socket lets you hear yourself straight from the microphone, before the computer adds delay.

Next step

Put either model into the setup builder to check it against your computer and the rest of your gear. Test your microphone before you go live.

Full profiles: Shure SM7B and Elgato Wave Neo.

Sources