Webcam testMicrophone testWebcam and mic test
TestsWebcam testMicrophone testWebcam and mic testHeadphone testPre-stream checklist
SetupsSetup builderSetup guidesAudio routingCamera checker
SettingsBitrate calculatorUpload calculatorSettings by platformTwitchYouTube LiveKickFacebook LiveTikTok LIVE
GearAll gearComparisonsStream Deck selector
GuidesChoose your gearConnect and set upFix a problemAll guidesAll tools
AboutCorrections and contact

Search stays on this device. Esc to close.

Samson Q2U

A USB and XLR dynamic microphone with its cables and a desk stand in the box.

Logitech G Yeti

A USB condenser with four pickup patterns, gain on the microphone and a zero-delay headphone socket.

Before you choose

Samson Q2U

The catch: Its USB audio is 16-bit at 44.1 or 48 kHz. On the XLR route it needs an interface with a microphone preamp.

Check first:

  • For USB: a USB port that fits the cable

Logitech G Yeti

The catch: Its USB audio tops out at 16-bit, 48 kHz, and as a condenser it hears the room: use the cardioid pattern for one voice and speak from close in. The other three patterns take in more of the room by design.

Check first:

  • A USB port that fits the cable

Everything to check before you buy

Where they differ

SpecsSamson Q2ULogitech G Yeti
ConnectionUSB and XLRUSB
Samson Q2U also has an XLR output for an audio interface; Logitech G Yeti connects over USB only.
CapsuleDynamicCondenser
Samson Q2U is dynamic, which picks up less of the room; Logitech G Yeti is a condenser, which suits a quiet room.
Pickup patternsCardioidCardioid, Bidirectional, Omnidirectional, Stereo
Samson Q2U: cardioid. Logitech G Yeti: cardioid, bidirectional, omnidirectional, stereo.

Where they are the same

Stand in the box
Yes
Best USB recording format
16-bit, 48 kHz
Processing on the microphone
None listed
Headphone socket
Yes

Not enough data to compare

We haven’t confirmed a figure for one or both models on: Preamp gain needed, XLR cable in the box, USB cable in the box. The site leaves these out rather than guess.

What else each needs

Samson Q2U

Q2U
For USB: a USB port that fits the cable
For XLR: an audio interface or mixer with an XLR microphone input
A boom arm, if you want it closer
Wired headphones with a 3.5 mm plug
  • Check first: For USB: a USB port that fits the cable. A USB cable is in the box, but its ends are not listed. Check it against your computer’s ports.
  • Optional: For XLR: an audio interface or mixer with an XLR microphone input. A computer has no XLR input. The interface’s preamp raises the microphone’s signal and sends it to the computer over USB.
  • Optional: A boom arm, if you want it closer. A desk stand is in the box. An arm lets you bring the microphone nearer your mouth without it sitting in the camera shot.
  • Optional: Wired headphones with a 3.5 mm plug. Its headphone socket lets you hear yourself straight from the microphone, before the computer adds delay.

Logitech G Yeti

Yeti
A USB port that fits the cable
A boom arm, if you want it closer
Wired headphones with a 3.5 mm plug
Logitech G HUB with Blue VO!CE
  • Check first: A USB port that fits the cable. A USB cable is in the box, but its ends are not listed. Check it against your computer’s ports.
  • Optional: A boom arm, if you want it closer. A desk stand is in the box. An arm lets you bring the microphone nearer your mouth without it sitting in the camera shot.
  • Optional: Wired headphones with a 3.5 mm plug. Its headphone socket lets you hear yourself straight from the microphone, before the computer adds delay.
  • Optional: Logitech G HUB with Blue VO!CE. The maker’s app sets its processing and controls.

Next step

Put either model into the setup builder to check it against your computer and the rest of your gear, or see all 27 side by side in USB microphones for streaming compared. Test your microphone before you go live.

Full profiles: Samson Q2U and Logitech G Yeti.

Sources