Webcam testMicrophone testWebcam and mic test
TestsWebcam testMicrophone testWebcam and mic testHeadphone testPre-stream checklist
SetupsSetup builderSetup guidesAudio routingCamera checker
SettingsBitrate calculatorUpload calculatorSettings by platformTwitchYouTube LiveKickFacebook LiveTikTok LIVE
GearAll gearComparisonsStream Deck selector
GuidesChoose your gearConnect and set upFix a problemAll guidesAll tools
AboutCorrections and contact

Search stays on this device. Esc to close.

As an Amazon Associate I earn from qualifying purchases. How this site earns · Amazon offers a free 30-day Prime trial, with free delivery on eligible items.

RØDE NT-USB+

A USB condenser for a controlled recording space.

RØDE PodMic USB (Black)

A USB and XLR microphone: a computer now, a mixer later.

Before you choose

RØDE NT-USB+

The catch: Use the direct USB route and place the microphone close enough for a clear voice before treating room reflections with processing. Choose another microphone if an XLR mixer connection is required.

Check first:

  • A USB cable

RØDE PodMic USB (Black)

The catch: Choose a mount that supports the microphone’s documented weight. Use USB for its onboard processing, or plan processing and monitoring separately on the XLR route.

You need:

  • A microphone stand or boom arm

Check first:

  • For USB: a USB cable

Everything to check before you buy

Where they differ

SpecsRØDE NT-USB+RØDE PodMic USB (Black)
ConnectionUSBUSB and XLR
RØDE PodMic USB (Black) also has an XLR output for an audio interface; RØDE NT-USB+ connects over USB only.
CapsuleCondenserDynamic
RØDE PodMic USB (Black) is dynamic, which picks up less of the room; RØDE NT-USB+ is a condenser, which suits a quiet room.
Stand in the boxYesNo
RØDE NT-USB+ comes with a desk stand; RØDE PodMic USB (Black) needs a stand or boom arm.

Where they are the same

Pickup patterns
Cardioid
Best USB recording format
24-bit, 48 kHz
Processing on the microphone
Yes
Headphone socket
Yes

Not enough data to compare

We haven’t confirmed a figure for one or both models on: Preamp gain needed, XLR cable in the box, USB cable in the box. The site leaves these out rather than guess.

What else each needs

RØDE NT-USB+

NT-USB+
A USB cable
A boom arm, if you want it closer
Wired headphones with a 3.5 mm plug
  • Check first: A USB cable. Our record of the box lists no USB cable. Check the box before you plan the connection.
  • Optional: A boom arm, if you want it closer. A desk stand is in the box. An arm lets you bring the microphone nearer your mouth without it sitting in the camera shot.
  • Optional: Wired headphones with a 3.5 mm plug. Its headphone socket lets you hear yourself straight from the microphone, before the computer adds delay.

RØDE PodMic USB (Black)

PodMic USB
For USB: a USB cable
For XLR: an audio interface or mixer with an XLR microphone input
For XLR: an XLR cable
A microphone stand or boom arm
Wired headphones with a 3.5 mm plug
  • Check first: For USB: a USB cable. Our record of the box lists no USB cable. Check the box before you plan the connection.
  • Optional: For XLR: an audio interface or mixer with an XLR microphone input. A computer has no XLR input. The interface’s preamp raises the microphone’s signal and sends it to the computer over USB.
  • Optional: For XLR: an XLR cable. None comes in the box.
  • You need: A microphone stand or boom arm. No stand comes in the box.
  • Optional: Wired headphones with a 3.5 mm plug. Its headphone socket lets you hear yourself straight from the microphone, before the computer adds delay.

Next step

Put either model into the setup builder to check it against your computer and the rest of your gear, or see all 27 side by side in USB microphones for streaming compared. Test your microphone before you go live.

Full profiles: RØDE NT-USB+ and RØDE PodMic USB (Black).

Sources