MyStreamSetup
MyStreamSetup
Webcam testMicrophone testWebcam and mic test
TestsWebcam testMicrophone testWebcam and mic testHeadphone testPre-stream checklist
SetupsSetup builderSetup guidesAudio routingCamera checker
SettingsBitrate calculatorUpload calculatorSettings by platformTwitchYouTube LiveKickFacebook LiveTikTok LIVE
GearAll gearComparisonsStream Deck selector
GuidesChoose your gearConnect and set upFix a problemAll guidesAll tools
AboutCorrections and contact

Search stays on this device. Esc to close.

Comparisons / Mixers / ATEM Mini Pro vs RØDECaster Duo

Blackmagic ATEM Mini Pro vs RØDE RØDECaster Duo

Blackmagic ATEM Mini Pro also takes HDMI video (4 switchable 10-bit HD HDMI inputs with 2-channel embedded audio); RØDE RØDECaster Duo is audio only. Blackmagic ATEM Mini Pro has no XLR microphone input; RØDE RØDECaster Duo has 2 XLR microphone inputs. Count the voices you need at once.

From each maker’s own specifications; neither model was tested by this site.

As an Amazon Associate I earn from qualifying purchases. How this site earns · Amazon offers a free 30-day Prime trial, with free delivery on eligible items.

Blackmagic ATEM Mini Pro

Switch live between up to four HDMI cameras or consoles.

Check price on Amazon ↗

RØDE RØDECaster Duo

Two people in the room, plus a remote guest and computer sound.

Check price on Amazon ↗

On the makers’ own sites:

Before you choose

Blackmagic ATEM Mini Pro

The catch: Plan an HD stream from its USB webcam output. If you need to record in 4K, choose a capture card that lists 4K output; its HDMI inputs don’t make it a 4K capture device.

You need:

  • An HDMI cable for each camera or computer

Check first:

  • A USB cable

RØDE RØDECaster Duo

The catch: Assign the stream, headphones and guest return explicitly. Exclude the guest’s own voice from their return, then record a call to check the mix before going live.

You need:

  • A microphone: an XLR microphone and an XLR cable for each input you use, or a headset with a 3.5 mm TRRS plug, or a RØDE USB microphone it supports, or a RØDE Series IV wireless microphone
  • Headphones with a 1/4-inch plug (or a 3.5 mm adapter), or a headset in the 3.5 mm TRRS socket

Check first:

  • A USB-C port on your computer

Everything to check before you buy

Where they differ

SpecsBlackmagic ATEM Mini ProRØDE RØDECaster Duo
HDMI video inputs4 switchable 10-bit HD HDMI inputs with 2-channel embedded audioNone
Blackmagic ATEM Mini Pro also takes HDMI video (4 switchable 10-bit HD HDMI inputs with 2-channel embedded audio); RØDE RØDECaster Duo is audio only.
XLR microphone inputs02
Blackmagic ATEM Mini Pro has no XLR microphone input; RØDE RØDECaster Duo has 2 XLR microphone inputs. Count the voices you need at once.
PowerMains, 12 V supplyUSB-C Power Delivery (9 V, 3 A)
Power: Blackmagic ATEM Mini Pro runs on mains, 12 V supply; RØDE RØDECaster Duo on USB-C Power Delivery (9 V, 3 A).

Not enough data to compare

We haven’t confirmed a figure for one or both models on: Preamp gain, Headphone outputs, Loopback, Mix-minus. The site leaves these out rather than guess.

What else each needs

Blackmagic ATEM Mini Pro

ATEM Mini Pro
An HDMI cable for each camera or computer
A USB cable
  • You need: An HDMI cable for each camera or computer. Its video inputs are HDMI: 4 switchable 10-bit HD HDMI inputs with 2-channel embedded audio.
  • Check first: A USB cable. Our record of the box lists no USB cable. Check the box before you plan the connection.

RØDE RØDECaster Duo

RØDECaster Duo
A microphone: an XLR microphone and an XLR cable for each input you use, or a headset with a 3.5 mm TRRS plug, or a RØDE USB microphone it supports, or a RØDE Series IV wireless microphone
Headphones with a 1/4-inch plug (or a 3.5 mm adapter), or a headset in the 3.5 mm TRRS socket
A USB-C port on your computer
  • You need: A microphone: an XLR microphone and an XLR cable for each input you use, or a headset with a 3.5 mm TRRS plug, or a RØDE USB microphone it supports, or a RØDE Series IV wireless microphone. Its microphone inputs: 2 mic/instrument/line combo inputs; 1 TRRS headset I/O; RODE USB microphone support; RODE Series IV wireless (up to two transmitters, built-in receiver).
  • You need: Headphones with a 1/4-inch plug (or a 3.5 mm adapter), or a headset in the 3.5 mm TRRS socket. Its headphone socket is 1/4-inch; the headset socket takes a 3.5 mm TRRS headset.
  • Check first: A USB-C port on your computer. The cable in the box has USB-C at both ends. If your computer only has USB-A ports, you need a USB-C to USB-A cable rated for the same speed.

Next step

Put either model into the setup builder to check it against your computer and the rest of your gear, or see all 11 side by side in Streaming mixers and production consoles compared. Plan your audio routing before you go live.

Full profiles: Blackmagic ATEM Mini Pro and RØDE RØDECaster Duo.

Sources